SkyStream TWO User Manual page 10

10
Playback Settings – Leave this section alone.
Sound
Digital Sounds – This section will allow you to modify your sound
output.
PCM – PCM is the default setting. This option is for when the box is
connected directly to the TV with an HDMI cable for video and
sound.
SPDIF RAW – This option enables the sound to be sent through an
Optical Audio cable to a Sound Bar or Surround Sound System. This
is also known as SPDIF Pass-through.
HDMI RAW - This option enables the sound to be sent through an
HDMI cable to a Surround Sound System. This is also known as HDMI
Pass-through.
Upgrade bluetoothremote – Leave this setting alone.
More Settings – More settings is just another screen for the settings
that have already been covered in this manual.
Add Accessory – This section will allow you to pair Bluetooth devices
with your unit. When you click on it, it will automatically start
looking for nearby Bluetooth devices. MAKE SURE any device you
are trying to pair is in pair mode. Please consult the user manual of
the device you are trying to pair for instructions on putting that
device into pair mode.