Messages On The Display - Avaya T3 (IP) Compact User Manual

Messages on the display

The following is an overview of important display and status messages. Standard
Messages on the display
displays and messages are shown in the case of special settings.
Other subscribers
Busy
Bundle
Bundle busy
Bundle .. private
Self-assignment
Earth / flash
Call
Internal number
K:
Code
Empty
PIN
PIN code
Refer-back host PABX For initiating a consultation call (refer-back) to another con-
Call
Prevent general call
Cut out of hunt group You have cut your telephone out of the hunt group.
Malfunction
Phone locked
When you want to save a call number for another subscri-
ber (only possible if enabled by Avaya Service).
The dialled connection is busy.
When you want to seize a line from a particular bundle.
All lines in the selected bundle are busy.
To seize a line in a bundle reserved for you.
Audible notification of calls on your own telephone that are
normally answered by other subscribers.
Select this menu item if you are connected to a host system
which requires a flash key for external access.
You are connected to the call number displayed.
For storing the number of a telephone connected to your
system.
All keystrokes are sent as keypad information. Used to pro-
gram a telephone system or to use service features in the
network.
For every call resulting in charges, you can enter a three to
ten-digit code for billing the charges, e.g. a project or job
number.
There are no entries stored in the telephone book.
PIN (Personal Identification Number), four digit: for locking
and unlocking your telephone.
If you have a PIN (Personal Identification Number), you can
make external calls from locked phones: PIN code = inter-
nal number + PIN.
nected system.
The subscriber you are calling is not occupying the line.
Your telephone is cut out of the general call.
There is a malfunction e.g. in the line or in a connected
printer. The malfunction message is displayed until the mal-
function is corrected.
Your telephone is locked. To unlock it, select the Lock
menu item and enter your PIN (Personal Identification
Number).
Look it up whenever in doubt
121