Jeep Liberty 2008 Owner's Manual page 76

LATCH-Compatible Child Restraint System" and "In-
stalling Child Restraints Using the Vehicle Seat Belt" in
this section for typical installation instructions.
Installing the LATCH-Compatible Child Restraint
System
We urge that you carefully follow the directions of the
manufacturer when installing your child restraint. Not all
child restraint systems will be installed as described here.
Again, carefully follow the installation instructions that
were provided with the child restraint system.
The rear seat lower anchorages are round bars, located at
the rear of the seat cushion where it meets the seatback,
and are just visible when you lean into the rear seat to
install the child restraint. You will easily feel them if you
run your finger along the intersection of the seatback and
seat cushion surfaces.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75
Latch Anchorages
In addition, there are tether strap anchorages behind each
rear seating position located on the back of the seat.
2