To Activate - Jeep Liberty 2008 Owner's Manual

Speed Control Lever

To Activate:

Push and release the ON/OFF button located
on the end of the Speed Control lever. The
Cruise indicator lamp in the instrument cluster
will illuminate. To turn the system off, push
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155
and release the ON/OFF button a second time. The
Cruise indicator lamp will turn off. Be sure to turn the
system off when not in use.
NOTE:
• The Electronic Speed Control system will automati-
cally turn off when the engine is turned off.
• The Electronic Speed Control system is designed to
shut down if you operate multiple speed control
switch-functions simultaneously (i.e., Set and Cancel).
If this occurs, push and release the ON/OFF button to
reactivate the system and then reestablish the desired
Set speed.
3