Jeep Liberty 2008 Owner's Manual page 337

Hide thumbs Also See for Liberty 2008:

Table of Contents

336 STARTING AND OPERATING

However, the driver can override HDC operation by

applying the brake to slow the vehicle down below the

HDC control speed. Conversely, if more speed is desired

during HDC control, the accelerator pedal will increase

vehicle speed in the usual manner. When either the brake

or the accelerator is released, HDC will control the

vehicle at the original set speed.

NOTE: HDC is available on vehicles equipped with the

MP1522 transfer case.

• The transfer case must be in 4WD LOW range to

• HDC is enabled only when the "Hill Descent Control

Indicator" light in the instrument cluster is on solid.

• HDC will NOT activate when the automatic transmis-

sion is in PARK.

3 mph (4.5 km/h)

• HDC will NOT activate on level ground.

• HDC will NOT activate at vehicle speeds above 30

mph (50 km/h).

The "Hill Descent" button is located in the lower switch

bank below the climate control.

Hill Descent Button

Chapters

Table of Contents