Bluetooth Operation; Pairing A Bluetooth Device - Jensen JWM40 Installation And Owner's Manual

BLUETOOTH OPERATION

The JWM40 includes built-in Bluetooth technology that allows you to connect this
head unit to Bluetooth-enabled devices for streaming audio playback.
About Bluetooth Technology
Bluetooth wireless technology is a short-range wireless radio protocol. Operating in
the 2.4 GHz range, it transmits audio and data at speeds up to 2.1 Mbit/s over a
range of up to 10 meters.
Bluetooth Menu Options
NOTE: Please note that some Bluetooth menu options are only available while
the unit is in Bluetooth Audio mode.
Press and hold the BT button (10) to enter menu adjustment mode. Repeatedly press
the >>| or |<< buttons (5, 2) or SETTINGS button (23) to access the "Bluetooth On/Off"
menu function. Rotate the volume encoder knob to select BLUETOOTH ON, then
press the ENTER button (12) to turn the Bluetooth function On or Off. The following
menu options are available when the unit is in Bluetooth mode.
Use >>| or |<< to
Navigate the List
Press Enter
BT Device
Device 1
...
Connect/Disconnect
...
...
Device 5
Connect/Disconnect
Press Enter
Device 1
Device 2
Device 3
Device 4
Device 5
Lock/Unlock
Delete
Lock/Unlock
Delete
Bluetooth Pair <ENTER>: Press and hold BT button (10) to start pairing with a

Bluetooth enabled device.
Bluetooth Device: Press the ENTER knob button to view a list of previously

paired mobile devices models. Press the >>| or |<< buttons to view devices from
the list. You cannot delete a device that is actively connected. Press the ENTER
knob button to select the device. Press the >>| or |<< button to choose
Lock/Unlock, Connect/Disconnect or Delete for this device.
Bluetooth Pair (BT Pair): Press and hold the BT button for about 4 seconds to

start pairing with a Bluetooth
Disconnect: To disconnect a paired device, press the ENTER knob button to

temporarily remove the Bluetooth link. The link can be re-established through
your phone menu by selecting the JWM40 for connection.
Lock/Unlock: The JWM40 can store up to 5 devices for Bluetooth connection.

The devices are stored in FIFO (First In First Out) order. To prevent a device
from being bumped from the list when more than 5 devices are used, you must
lock the device. To Lock/Unlock a device, press the ENTER knob button.
Delete: To delete a device from the list, press the ENTER knob button.


Pairing a Bluetooth Device

Before you begin, consult the owner's manual for the Bluetooth device you want to
pair with the JWM40.
1. Press the BT button (10) to enter Bluetooth mode.
2. Press and hold the BT button to start the Bluetooth pairing process. The JWM40
will display "PAIR" and will be available to pair for 120 seconds.
3. In your device Bluetooth settings, select "JWM40" to connect.
4. If prompted for a password, enter "0000".
After connecting successfully, you will be able to listen to audio from your Bluetooth
enabled device through the JWM40.
Bluetooth Audio (A2DP)
The A2DP music is available for Bluetooth enabled phones when the phone is
connected. To access Bluetooth mode and play songs stored in your phone, press
the BT button (10) to enter the Bluetooth mode.
While in Bluetooth mode, the "BT PAUSE" will display on the LCD.
Selecting Tracks
During playback, press the >>| or |<< button (5, 2) to play the previous or next track.
Pausing Playback
14
JWM40