Bluetooth Operation - Jensen JWM90A Installation & Owner's Manual

BLUETOOTH OPERATION

The JWM90A includes built-in Bluetooth technology that allows you to connect
this head unit to Bluetooth devices for streaming audio playback.
About Bluetooth Technology
Bluetooth wireless technology is a short-range wireless radio protocol.
Operating in the 2.4 GHz range, it transmits audio and data at speeds up to 2.1
Mbit/s over a range of up to 10 meters.
Bluetooth On/OFF
Bluetooth mode is turned ON by default. Bluetooth can be turned OFF to reduce
the standby current draw of the JWM90A. Press the SETTINGS button (7) to
enter menu adjustment mode. Repeatedly press the >>| or |<< buttons (20, 19)
or SETTINGS button to access BLUETOOTH ON/OFF. Rotate the
VOL/ENTER knob to select ON or OFF.
Bluetooth Menu Options
NOTE: Please note that some Bluetooth menu options are only available
while the unit is in Bluetooth Audio mode.
Press the SETTING button (7) to enter menu adjustment mode. Repeatedly
press the >>| or |<<buttons (19, 20) or SETTING button to access the "Bluetooth
Device" menu. The following menu options are available when the unit is in
Bluetooth mode.
BLUETOOTH PAIR: Press the ENTER knob to make the JWM90A available to
Ÿ
pair with a Bluetooth enabled device.
BLUETOOTH DEVICES: Press the ENTER knob button to view a list of
Ÿ
previously paired mobile devices models. Press the >>|or|<< buttons to view
devices from the list. You cannot delete a device that is actively connected.
Press the ENTER knob button to select the device. Press the >>|or |<< buttons
to choose Locked/Unlocked, Connect/Disconnect or Delete for this device.
CONNECT/DISCONNECT: To disconnect a paired device, press the ENTER
Ÿ
knob button to temporarily remove the BT link. The link can be re-established
through your phone menu by selecting the JWM90A for connection.
Ÿ LOCKED/UNLOCKED: The JWM90A can store up to 5 devices for BT
connection. The devices are stored in FIFO (First In First Out) order. To prevent
a device from being bumped from the list when more than 5 devices are used,
you must lock the device. To Lock/Unlock a device, press the ENTER knob
button.
DELETE: To delete a device from the list, Press the ENTER knob button.
Ÿ
Pairing a Bluetooth Device
Before you begin, consult the owner's manual for the Bluetooth device you want to
pair with the JWM70A.
Make sure the device you intend to pair with is on and ready to pair.
1. Press PAIRbutton (9) to enter Bluetooth mode.
2. Press & Hold PAIR button to start Bluetooth pairing process.
The JWM70A will display "PAIRING" and will be available to pair for 120 seconds.
3. In your device Bluetooth settings, select"JWM70A" to connect.
Answering a Call
When answering a call using the connected phone, BT AUDIO will pause. After
hanging up from the call, BT AUDIO will automatically resume on some phones. It
may be necessary to press the play button to resume BT AUDIO.
Bluetooth Audio (A2DP)
The A2DP music is available for Bluetooth enabled phones when the phone is
connected. To access Bluetooth mode and play songs stored in your phone, press
the PAIR button (9) to enter the Bluetooth mode.
Selecting Tracks
During playback, press the >>| or |<< button (8, 6) to play the previous or next track.
18
JWM90A