INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES. in this owner's manual clear and easy to follow. If you take a few minutes to look through it, you'll learn how to use all the features of your new Jensen receiver for maximum enjoyment.
HEAD 4 PLACES (-) battery cable prior to installation. NOTE: If the JWM20 is to be installed in a vehicle equipped with an onboard NOTE: Before cutting the mounting hole, make sure the area behind the drive or navigation computer, do not disconnect the battery cable. If the mounting location is clear of wires, fuel and vacuum or brake lines.
JWM20 WIRING WARNING: Wiring harness comes with stripped and tinned leads to aid in the installation process. Any unused speaker wires must have their exposed ends cut The wiring diagram depicts all the wiring connections required for proper off or insulated individually.
Press the button (13) on the front panel to turn the dimmer On (selected Ÿ RESET: Press button (22) to reset the JWM20 to factory default settings. brightness level) and press again to turn the dimmer Off (maximum brightness level).
Page 7
You can connect a USB device directly to USB interface (16) on the front of the device manufacturer's or smartphone service provider's web site for more JWm20 for playback of compatible files. Press BT/USB button (5) to switch to information.
JWM20 Recall a Station TUNER OPERATION Select a band (if needed), Press 1-6 preset button to select the corresponding stored station. Automatically Store / Preset Scan (AS/PS) Auto Store Select an AM or FM band, Press & hold the AM/FM button (4) to access tuner menu list: AUTO STORE &...
JWM20 MP3/USB OPERATION Play/Pause Press the button (22) to suspend or resume media playback. Next/Previous File or buttons (12,11) to select the previous or next track. Press the Folder Up/Down Press the 6/FD UP button (14) to access higher folder level (FOLDER UP)
Before you begin, consult the owner's manual for the Bluetooth device you want to Device 5 pair with the JWM20. Make sure the device you intend to pair with is on and ready to receive a signal from the JWM20. Press the BT/USB button (5) to enter Bluetooth mode.
Page 11
JWM20 Answering a Call When answering a call using the connected phone, Bluetooth audio playback will pause. After hanging up from the call, Bluetooth audio will continue on some phones. It may be necessary to press the play button (22) to resume Bluetooth audio playback.
JWM20 REMOTE CONTROL OPERATION DESCRIPTION TUNER BLUETOOTH MP3/USB SYSTEM MENU LOUD Turn radio on/standby Turn radio on/standby Turn radio on/standby Turn radio on/standby Power mode. mode. mode. mode. ALARM Adjust volume up/down. Adjust volume up/down. Adjust volume up/down. Adjust volume up/down.
Page 13
JWM20 Repeat track Select source for Select source for Select source for Select source for SOURCE playback playback playback playback ZOOM ANGLE Access Audio Menu Access Audio Menu Access Audio Menu Access Audio Menu options. options. options. options. GOTO Switch Clock and current...
JWM20 CARE AND MAINTENANCE FCC Notes Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might NOTE: This equipment has been tested and found to comply with the limits for a contain minerals that can corrode the electronic circuits.