Clock Display; Clock Setup; Sleep Mode; Alarm Setting - Jensen JWM40 Installation And Owner's Manual

Setting the Bluetooth
Bluetooth (On/Off): Choose "Bluetooth On" or "Bluetooth Off".

Bluetooth Device (Locked/Unlocked, Disconnect/Connect, Delete): view, lock

and delete from a list of previously paired mobile device models.
Bluetooth Pair: Press "ENTER" knob to automatically pair a device.

PRESET Volume (PVOL): Select an automatic turn on volume

Reset
Press ENTER knob button to reset the JWM40 to factory default.
Auxiliary Input Function
Press the AUX button (14) to directly access auxiliary input modes (AUX IN1 and
AUX IN2) from any other mode when a portable audio device is connected to the unit.
To connect a portable audio device, insert a standard 3.5mm (audio line output or
headphone output from your portable CD / MP3 / iPod or other media player) into the
AUX A/V IN connector (AUX IN1) (36) on the front of the unit or the AUDIO IN (AUX
IN2) on the back of the unit (see "Wiring" on page 4).
Auxiliary Input Connector
For front panel A/V input, an external audio/video (A/V) source such as a video game
player, camera, etc. can be connected to the front panel A/V input with the provided
3.5mm A/V cable adapter (Please note that there are several different A/V cable
"standards"). Connect the device to the AUX A/V IN connector (36) on the front panel.
In addition to front panel auxiliary input source, the unit can also be connected to the
RCA audio input through the AUX AUDIO INPUT jack on the rear of the unit.
Press the AUX button (14) to directly access auxiliary input modes (AUX 1 IN and
AUX 2 IN) from any other mode when a portable audio device is connected to the
unit.
USB Interface Connector
You can connect a USB device directly to USB interface (19) on the front of the
JWM40 for playback of compatible files. Playback begins automatically. Press the
USB button (12) to switch to USB mode from another source. Refer to "MP3/USB
Operation" on page 12 for additional operating instructions.
NOTE: USB will not support Apple device playback. The USB input supplies up
to 1A of charging current.

Clock Display

Press the VIEW button (25) to alternate between playing time and clock time while in
Tuner, CD, DVD, USB or auxiliary input mode.

Clock Setup

Press and hold the clock HOUR or MINUTE button (28, 30) to access clock setup
mode. The number representing the hours and minutes will flash. Press the HOUR
button (28) to adjust the hour and press the MINUTE button (30) to adjust minutes.
The new time will be saved five seconds after the last adjustment is made.

Sleep Mode

The Sleep Timer will automatically turn off the JWM40 in the designated number of
minutes. To set the Sleep Time, press the SLEEP button (26) and the sleep time will
appear in the display with the number representing the minutes (SLEEP 0). Press
SLEEP button repeatedly to change the sleep time from 0 (OFF), 15, 30, 45 or 60
minutes.

Alarm Setting

To set the alarm, press and hold the ALARM button (24) for 2 seconds and the clock
digits will be flashing. Press the HOUR button to adjust the hour once at a time or
press and hold to advance rapidly. Repeatedly press the MINUTE button to adjust the
minute one digit at a time, or press and hold to advance rapidly.
Press the ALARM SET or ENTER knob button to save the alarm time.
Once a time is set, press ALARM (24) to turn the alarm function on or off.

Remote Sensor

Infrared receiver (18) is located on the upper left of front panel to receive infrared
signal emitted by the remote control.
Speaker Output
The two speaker output buttons (15, 17) (Zone A, Zone B) control speaker zones
output from the radio. Press any of the two buttons to turn the corresponding speaker
zone on or off. SPK A (Zone A), SPK B (Zone B) will appear on the display.
6
JWM40