Bluetooth Operation - Jensen JWM60A Installation And Owner's Manual

BLUETOOTH OPERATION

The JWM60A includes built-in Bluetooth technology that allows you to connect
this head unit to Bluetooth devices for streaming audio playback.
About Bluetooth Technology
Bluetooth wireless technology is a short-range wireless radio protocol.
Operating in the 2.4 GHz range, it transmits audio and data at speeds up to 2.1
Mbit/s over a range of up to 10 meters.
Bluetooth Menu Options
NOTE: Please note that some Bluetooth menu options are only available
while the unit is in Bluetooth Audio mode.
Press and hold the BT button (22) to enter menu adjustment mode. Repeatedly
press the >>| or |<< buttons (35, 6) or SETTING button to access the "Bluetooth
On/Off" menu function. Rotate the volume encoder knob to select BLUETOOTH
ON, then press the ENTER button to turn the Bluetooth function On or Off. The
following menu options are available when the unit is in Bluetooth mode.
Bluetooth Pair <ENTER>: Press and hold the BT (22) button for about 4
Ÿ
seconds to start pairing with a Bluetooth enabled device.
Bluetooth Device: Press the ENTER knob button to view a list of previously
Ÿ
paired mobile devices models. Press the >>|or|<< buttons to view devices from
the list. You cannot delete a device that is actively connected. Press the ENTER
knob button to select the device. Press the >>|or |<< button to choose
Locked/Unlocked, Connect/Disconnect or Delete for this device.
Bluetooth Pair (BT Pair): Press and hold the BT button (22) for about 4 seconds
Ÿ
to start pairing with a Bluetooth enabled device.
DISCONNECT: To disconnect a paired device, press the ENTER knob button to
Ÿ
temporarily remove the BT link. The link can be re-established through your
phone menu by selecting the JWM60A for connection.
LOCKED/UNLOCKED: The JWM60A can store up to 5 devices for BT
Ÿ
connection. The devices are stored in FIFO (First In First Out) order. To prevent
a device from being bumped from the list when more than 5 devices are used,
you must lock the device. To Lock/Unlock a device, press the ENTER knob
button.
Ÿ DELETE: To delete a device from the list, Press the ENTER knob button.
Pairing a Bluetooth Device
Before you begin, consult the owner's manual for the Bluetooth device you want to pair
with the JWM60A.
Make sure the device you intend to pair with is on and ready to pair.
1. Press BT button to enter Bluetooth mode.
2. Press and hold BT button to start Bluetooth pairing process. The JWM60A will
display "PAIR" and will be available to pair for 120 seconds.
3. In your device Bluetooth settings, select "JWM60A" to connect.
After connecting successfully, you are able to listen to music stored on your Bluetooth
enabled device through the JWM60A.
Answering a Call
When answering a call using the connected phone, BT AUDIO will pause. After
hanging up from the call, BT AUDIO to continue on some phones. It may be necessary
to press the play button to resume BT AUDIO.
Bluetooth Audio (A2DP)
The A2DP music is available for Bluetooth enabled phones when the phone is
connected. To access Bluetooth mode and play songs stored in your phone, press
the BT button (22) to enter the Bluetooth mode.
While in Bluetooth mode, the "BT PAUSE" will display on the LCD.
15
JWM60A