If you take a few minutes to look INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES. through it, you’ll learn how to use all the features of your new Jensen receiver for maximum enjoyment.
JWM60A DISC NOTES Be sure to use only round CDs for this unit and do not use any special shape Ÿ CDs. Use of special shape CDs may cause the unit to malfunction. Do not stick paper or tape on the disc. Do not use CDs with labels or stickers Ÿ...
(-) batterycable prior to installation. 20 PHILLIPS TYPE ROUND HEAD 4 PLACES .75" 0.6" NOTE: If the JWM60A is to be installed in a vehicle equipped with an on- board drive or navigation computer, do not disconnect the battery cable. If .23" 0.6"...
JWM60A WIRING WARNING: Wiring harness comes with stripped and tinned leads to aid in the installation process. Any unused speaker wires must have their exposed ends cut The wiring diagram depicts all the wiring connections required for proper off or insulated individually.
“BAL 0” indicates an equal balance between the left and right speakers. Ÿ FAD: Adjust the speaker fade between “R7” (rear) and “F7” (front). “FAD 0” Press ENTER knob button to reset the JWM60A to factory default set up values. indicates and equal balance between the rear and front speakers.
Sleep Mode the AUDIO IN (AUX IN2) on the back of the unit (see“Wiring” on page 3). The Sleep Timer will automatically turn off the JWM60A in the designated number of Auxiliary Input Connector minutes. To set the Sleep Time, press the SLEEP button (37) and the sleep time will For front panel A/V input, an external audio/video (A/V) source such as a video appear in the display with the number representing the minutes (SLEEP 0).
JWM60A TUNER OPERATION Automatically Store / Preset Scan (AS/PS) Automatically Store Select an AM or FM band. Press and hold the AS/PS button (30) for more than 3 seconds and the unit will automatically scan for and store 12 or 18 strongest stations for AM or FM respectively.
JWM60A DISC OPERATION Track Select Press the >>| or |<< button (35, 6) to advance to the previous or next track on the CD. The selected track number will appear on the display. Press and hold the >>| or |<<...
Page 12
JWM60A Remote Control Direct Track Entry Stop Playback To select a track directly, use the number pad on the remote control (10). ■ Press the 1/ button (7) to suspend disc play, and “PRE STOP” will appear in the For single digit entries, press the corresponding number for two digit display.
Page 13
JWM60A 2. Use the ◄►or ▲▼cursor buttons (15) on the remote control to access 00:02:18 –total elapsed playing time of the current track; the fields on the "PROG" screen. C –00:34:37 –remaining playing time of the current track; 3. Use the number buttons on the remote control to enter a track number in T 00:02:18 –total elapsed playing time for disc;...
JWM60A Mp3 Monitor Display MP3/USB OPERATION After loading an MP3 disc or USB device, the following screen will appear on your output Monitor. Select one of these icons to access the corresponding media on your disc or USB device. If the media type is not present, the icon will not be selectable.
Page 15
JWM60A Random Shuffle (RDM) GOTO Direct Track/Chapter Access Press the 3/ button (9) during disc play to play all files in random, shuffled order. Press 3/ again to stop random play. Use the GOTO function to access a track (chapter) directly.
Make sure the device you intend to pair with is on and ready to pair. 1. Press BT button to enter Bluetooth mode. 2. Press and hold BT button to start Bluetooth pairing process. The JWM60A will display "PAIR" and will be available to pair for 120 seconds.
JENSEN stereo system. Store away your old remotes and enjoy the convenience of all the primary functions of your JENSEN stereo right from your phone or tablet by Pausing Playback transforming your mobile device into a functional stereo remote control! During playback, press the ▶II button (33) to pause the Bluetooth audio...
JWM60A REMOTE CONTROL OPERATION DESCRIPTION TUNER BLUETOOTH CD/MP3/USB LOUD Turn radio on/standby Turn radio on/standby Turn radio on/standby Turn radio on/standby Power mode. mode. mode. mode. ALARM Adjust volume up/down. Adjust volume up/down. Adjust volume up/down. Adjust volume up/down. VOL +/-...
Page 19
JWM60A Press to view title TITLE menu. Use directional arrows and play button to play selected title. May not be supported by all discs. Repeat track Repeat chapter Select source for Select source for Select source for Select source for...
JWM60A DVD SETUP MENU Lanuage Setup Press the (setup) button (10) on the remote control to access the SETUP The Language Setup menu controls the following features: menu and adjust system settings for the following categories: System Setup Language Setup...
JWM60A Video Setup The Video Setup menu controls the following features: – Brightness Contrast – – Saturation – Sharpness – Digital Setup The Speaker Setup menu controls the following features: OP Mode: Select LINE OUT or RF REMOD. – Dynamic Range: Select FULL, 6/8, 4/8, 2/8 or OFF.
JWM60A CARE AND MAINTENANCE TROUBLESHOOTING – Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Symptom Solution Keep the product away from dust and dirt, which can cause premature wear –...
JWM60A SPECIFICATIONS FCC Notice NOTE: This equipment has been tested and found to comply with the limits for a FM Tuner Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are Frequency Coverage (USA) ......87.5 to 107.9 MHz designed to provide reasonable protection against harmful interference in a Frequency Coverage (Europe) .
Need help?
Do you have a question about the JWM60A and is the answer not in the manual?
Questions and answers