Safety Precautions; Laser Warnings And Safety - ADJ Stinger II User Instructions

SAFETY PRECAUTIONS

Safety Issues: This unit may "pop" the fuse if the maximum allotted load of 2 amps is reached.
• To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture.
• Do not spill water or other liquids into or on to your unit.
• Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce
the risk of electrical shock and fire in case of an internal short. Do not attempt to operate this unit if the power
cord has been frayed or broken.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user serviceable parts inside.
• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6" (15cm) between
this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product outdoors voids all warranties.
• During long periods of non-use, disconnect the unit's main power.
• Always mount this unit in safe and stable matter.
• Power cords should be routed so they are not likely to be walked on, pinched by items placed upon or
against them.
• Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 14 for
cleaning details.
• Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or
other appliances (including amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain or water.
D. The unit does not appear to operate normally or exhibits a marked change in performance.

LASER WARNINGS AND SAFETY

NON-INTERLOCKED HOUSING WARNING
The Stinger II contains high power laser devices internally. Do not open the laser housing, due to the potential
exposure to unsafe levels of laser radiation. The laser power levels, if the unit is opened, can cause instant
blindness, skin burns and fires.
STOP AND READ ALL LASER SAFETY DATA
OPERATION INSTRUCTIONS AND LASER SAFETY
The light source emitted from this product can potentially cause eye injury if not set up and used properly. The
light source emitted from a laser is very different from any other light sources with which you may be aware of.
Laser light is thousands of times more concentrated than any light from any other kind of light source. This
concentration of light can cause instant eye injuries, primarily by burning the retina (the back of your eyeball
containing cells that are sensitive to light). Even if you cannot feel "heat" from a laser beam, it can still
potentially injure or blind you or your audience. Even very small amounts of laser beam light are potentially
hazardous even at long distances. Laser eye injuries can be sustained faster than you can blink.
Do not think that because this laser splits the laser beam into hundreds of beams and that the laser beam is
scanned out in high speed, that an individual laser beam is safe for eye exposure. This laser uses dozens of
A.D.J. Supply Europe B.V. – www.americandj.eu – Stinger II Instruction Manual Page 5