Recharging The Battery - DENTSPLY PROPEX II User Manual

C. Recharging the Battery
®
The ProPex II is delivered with a rechargeable battery.
®
On ProPex II a screen indicator shows the level of the battery charge. When this is
flashing, the battery requires recharging. However, it is still functional for several
treatments before the battery shuts down.
Procedure for recharging the battery:
1. Disconnect the measurement cable
2. Connect the charger cable to the ProPex
3. Connect the charger to the mains
Charging screen will appear during battery charging. When the battery image on the
screen stops blinking and turns green, the charging is complete.
Low
Duration of charging: About 12 hours (24 hours after long periods without use).
®
Note: ProPex II cannot be used while charging.
®
II
Mid Full
10 / 120