Table of Contents
Advertisement
To select an input source for an output display:
1. Select the target output channel / display from "STEP 1" or press "All" to
select all outputs. The front panel LED flashes to indicate the selected
output.
2. Select the target input channel / source from "STEP 2" for the select
output(s) or press "No" to turn off the output selected. The flashing LED
shows the selected input or "-" in solid state.
For instance, upon installation of a 8x4 DUX-12F Switching Matrix
installed with 6 x DUX-F-I-HDMIs (HDMI input board), 2 x DUX-F-I-
HDBTs (HDBaseT input board), 2 x DUX-F-O-HDMIs (HDMI output
board), and 2 x DUX-F-O-HDBTs (HDBaseT output board), to select
input 2 for output 1:
1)
Press "1" from "STEP 1", then the front panel LED 9 flashes.
2)
Press "2" from "STEP 2", the the LED 9 shows "2" in solid state.
System Code Switch
The IR Remote provided with the Matrix is shipped in
"00" IR system code. In the event the Remote's IR signal
interferes with other IR devices, e.g. TV, DVD player, the
Remote can be switched to "4E" code by short-pressing
the System Code Switch button. At the same time, you
may redefine the IR system code of the Matrix using the
API command (please refer to 16 & 17 API command in
"Appendix 1: API Command").
6.3 LAN Control (via Web UI)
When connected to a LAN, DUX-12F can be controlled through either Telnet
or the tailor-designed Web UI. For advanced users who opt to control via
Telnet, API command set is available in "Appendix 1: API Command". For
users who prefer intuitive control, the Web UI will be the option.
The Web UI designed for the Matrix allows basic controls and advanced
settings of the Matrix and can be accessed through a modern browser, e.g.
Chrome, Safari, Firefox, Opera, IE10+, etc.
DUX-12F comes with a default IP address of 192.168.10.254 and Subnet
mask of 255.255.0.0. Default login password for Web UI is "admin".
To get access to Web UI:
3. Connect the LAN port of the Matrix to your PC using a straight UTP cable.
18
8
System Code
Switch
Short press to change
the System Code of the
IR Remote.
DUX-12F
USER MANUAL
Advertisement
Table of Contents
