AMX DUX-12F User Manual page 10

13 RS232
14 IR EXT.
15 Power Switch
16 Power Input
17 EDID
10
Uses a DB9 connector to connect a control system for
Telnet API control.
IR extension port. Plug in an IR Receiver to control the
device.
Press to power on or off the device.
Connect this input to power supply using the power cord
provided. Power requirement: 100~240VAC 50/60Hz.
For EDID management. (For more information, please
go to "9. EDID MANAGEMENT").
DUX-12F
USER MANUAL