Resolution Setting - AMX DUX-12F User Manual

1. Click "Enter" to enter the EDID Setting section.
2. Go to the target Input channel and select the settings from its drop-down
menu, then click to "Apply".
NOTE:
1) The EDID DIP Switch on the rear panel of the Matrix must be set to
"0000" (or up position). Otherwise the EDID setting is not configurable
(the "Apply" buttons will be greyed out
2) For HDMI input channels, the Matrix provides six EDID setting options:
4K@60Hz 5.1CH Audio, 4K@60Hz 2.0CH Audio, 4K@30Hz 5.1CH Audio,
4K@30Hz 2.0CH Audio, 1080P@60Hz 5.1CH Audio, and 1080P@60Hz
2.0CH Audio.
3) For HDBaseT input channels, the Matrix provides four EDID setting
options: 4K@30Hz 5.1CH Audio, 4K@30Hz 2.0CH Audio, 1080P@60Hz
5.1CH Audio, and 1080P@60Hz 2.0CH Audio.

3) Resolution Setting

Resolution Setting is where resolution can be set for each output channel.
• Output: click the drop-down menu to select the output.
• Resolution: click the drop-down menu to select the desired resolution for
DUX-12F
USER MANUAL
) through the Web UI.
Apply
25