Control Through Ir Remote - AMX DUX-12F User Manual

3. Press the Enter (
takes effect the LED stops blinking.

6.2 Control through IR Remote

DUX-12F Switching Matrix can be controlled by the IR Remote provided. Point
the IR Remote directly to the
Matrix's IR receiving window (3
@ Front Panel on page 8), you
can select input source for each
output.
If IR extension is required,
connect the IR Receiver to
the IR EXT (14 @ Rear Panel
on page 9) of the Matrix and
ensure the receiver eye is
accessible to the Remote.
Please note the IR receiving
window of the Matrix will remain
active when IR Receiver is
connected to the Matrix.
DUX-12F
USER MANUAL
) button to confirm the selection. When the selection
Press to select input
Press to select input
Press to confirm
Press to confirm
Select output channel/
display
Select all output channels
Select input channel/
source
Close selected output in
STEP 1
17