Electrolux STARLINE LARGE 249 Operating And Safety Instructions Manual page 5

Operation
The large cooking plate has 2 or 4 independent heating
zones which can be individually controlled. Operation is
extremely simple. By turning the control knob, the plate
surface temperature suitable for the food can be adjusted
continuously between 70 and 400 °C in the relevant
heating zone. The
SUPERTHERM ensures that the set plate temperature is
exactly maintained regardless of the size of the load, i.e.
whether the plate is empty or pots have been placed on
top. The temperature can be preselected steplessly.
However, the control knob is numbered with 13 settings
from 0 to 12, which approximately correspond to the
following plate temperatures in steady state:
Level Max. surface temperature °C in
0 (off)
1
2
3
4
5
6
7
8
9
10
11
12
Temperature distribution
If all control knobs are set to the same scale value, there
is virtually uniform temperature distribution over the entire
plate. When the settings of the individual heating zones
are different, different
depending on the position and level. The presence of
Position
Level
Operating Instructions STARLINE Ranges
electronic control system
steady state
20
70
100
130
160
190
220
250
280
310
340
370
400
temperature zones result,
Plate with 2 heating zones
A B
12 12
Control knob and operation lamp
Information for practical work:
standby
à la carte operation
In exceptional cases
The control panel can optionally be equipped with a green
operation lamp. This lamp lights up when at least one of
the cooking plates is switched-on. The lamp is on the side
of the range where the electrical connections are located.
The relevant heating zone is switched-off when the control
knob is at 0.
relatively large areas at different temperatures makes it
very easy to carry out various procedures at the same
time (cooking, keeping warm, preparing). The following
pictures show the steady state temperature distribution at
different knob positions and plate sizes.
Position
Level
switch setting 7 - 8
switch setting 10
switch setting 12
A B
12 0
5