Makita TD111D Instruction Manual page 6

Switch action
1
1. Switch trigger
CAUTION:
Before installing the battery car-
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released.
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop.
NOTE:
ing the switch trigger for about 6 minutes.
Lighting up the front lamp
CAUTION:
Do not look in the light or see the
source of light directly.
1
1. Lamp
1. Button
after releasing the switch trigger.
seconds.
similarly.
NOTE:
-
on, the lamp status is OFF.
NOTE:
this case, cool down the tool before operating again.
NOTE:
the lamp. Be careful not to scratch the lens of lamp, or
it may lower the illumination.
Reversing switch action
A
1. Reversing switch lever
6 ENGLISH
1
for one second within 10
1
B