Makita TD111D Instruction Manual

Cordless impact driver
Hide thumbs Also See for TD111D:


Cordless Impact Driver
Read before use.


Table of Contents

Summary of Contents for Makita TD111D

  • Page 1 INSTRUCTION MANUAL Cordless Impact Driver TD111D Read before use.
  • Page 2: Specifications

    SPECIFICATIONS Model: TD111D Fastening capacities Machine screw 4 mm - 8 mm Standard bolt 5 mm - 14 mm High tensile bolt 5 mm - 12 mm No load speed Hard impact mode 0 - 3,000 min Soft impact mode...
  • Page 3: Safety Warnings

    Prevent unintentional starting. Ensure the SAFETY WARNINGS switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with General power tool safety warnings that have the switch on invites accidents. WARNING: Remove any adjusting key or wrench before Read all safety warnings and all...
  • Page 4 WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace also void the Makita warranty for the Makita tool and strict adherence to safety rules for the subject charger. product.
  • Page 5: Functional Description

    Overloaded: FUNCTIONAL an abnormally high current. DESCRIPTION In this situation, turn the tool off and stop the application the tool on to restart. CAUTION: Always be sure that the tool is If the tool does not start, the battery is overheated. In switched off and the battery cartridge is removed this situation, let the battery cool before turning the tool before adjusting or checking function on the tool.
  • Page 6 Switch action 1. Button 1. Switch trigger after releasing the switch trigger. CAUTION: Before installing the battery car- tridge into the tool, always check to see that the switch trigger actuates properly and returns to for one second within 10 the "OFF"...
  • Page 7 CAUTION: Always check the direction of of rotation. Depress the reversing switch lever from the rotation before operation. terclockwise rotation. CAUTION: Use the reversing switch only after the tool comes to a complete stop. Changing the tion, the switch trigger cannot be pulled. direction of rotation before the tool stops may dam- age the tool.
  • Page 8 ASSEMBLY tion of the arrow and insert the bit-piece and driver should be inserted into the sleeve with its pointed CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed the driver bit. before carrying out any work on the tool. Installing or removing driver bit/ socket bit Optional accessory...
  • Page 9: Operation

    High tensile bolt OPERATION (1,224) (1,020) (816) (612) (408) (204) Standard bolt 1. Fastening time (second) 2. diameter (1,224) (1,020) the extent that the bit will not slip off the screw and turn the tool on to start operation. (816) NOTICE: If you use a spare battery to continue the operation, rest the tool at least 15 min.
  • Page 10: Maintenance

    1. Holster holder 2. CAUTION: These accessories or attachments ster button. are recommended for use with your Makita tool accessories or attachments might present a risk of for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center.
  • Page 12 Jan-Baptist Vinkstraat 2, Makita Europe N.V. 3070 Kortenberg, Belgium 3-11-8, Sumiyoshi-cho, Makita Corporation Anjo, Aichi 446-8502 Japan 885522-910 20160511...

Table of Contents