Embroidery; Quilter; Seam Guide - Siruba HSM-2722 Instruction

EMBROIDERY

QUILTER (Optional)
SEAM GUIDE (Optional)
(Use darning plate see page 16)
Remove the presser foot and attach
the darning plate.
Lower feed dog and move the hooped
fabric slowly in the desired direction
until the fabric has been embroidered.
1. Slide the arm through the hole on
top of the pressure foot holder.
2. Move the quilter to the required
stitch distance.
1. Use the seam guide to sew long seams
of an equal distance from the edge of
the fabric.
2. Screw the guide on the right side of the
needle plate and adjust the desired
distance.
3. While sewing, the edge of the fabric
must touch the guide.
- 31 -