Roland SK-50 Owner's Manual page 46

•Note off
Status Second Third
8nH kkH vvH
n=MIDI channel number :0H - FH (ch.1 - ch.16)
kk=Note number :0CH - 78H (12 - 120)
vv=Velocity :01H - 7FH (1 - 127)
•Note on
Status Second Third
9nH kkH vvH
n=MIDI channel number :0H - FH (ch.1 - ch.16)
kk=Note number :0CH - 78H (12 - 120)
vv=Velocity :01H - 7FH (1 - 127)
•Control change
- Bank select
Status Second Third
BnH 00H mmH
BnH 20H llH
n=MIDI channel number :0H - FH (ch.1 - ch.16)
mm,ll=Bank number :00H,00H - 7FH,7FH (bank1 - bank16384)
* This message is sent when you change Tones or Drum Set from the panel, or
transmit GS Setup Data.
* If Tx.PROG is Off, this message is not sent even if you change Tones or Drum
Sets from the panel.
- Modulation
Status Second Third
BnH 01H vvH
n=MIDI channel number :0H - FH (ch.1 - ch.16)
vv=Modulation depth :00H - 7FH (0 - 127)
- Data entry
Status Second Third
BnH 06H vvH
n=MIDI channel number :0H - FH (ch.1 - ch.16)
vv=Value of the parameter specified with RPN and/or NRPN
* This message is sent when you execute to transmit GS/GM Setup Data.
- Volume
Status Second Third
BnH 07H vvH
n=MIDI channel number :0H - FH (ch.1 - ch.16)
vv=Volume :00H - 7FH (0 - 127)
* This message is sent when you execute to transmit GS/GM Setup Data.
- Panpot
Status Second Third
BnH 0AH vvH
n=MIDI channel number :0H - FH (ch.1 - ch.16)
vv=Panpot :00H - 40H - 7FH (Left - Center - Right)
* This message is sent when you execute to transmit GS/GM Setup Data.
- Expression
Status Second Third
BnH 0BH vvH
n=MIDI channel number :0H - FH (ch.1 - ch.16)
vv=Expression :00H - 7FH (0 - 127)
* This message is sent when you depress an Expression pedal that has been
connected and assigned the Expression function.
- Hold1
Status Second Third
BnH 40H vvH
n=MIDI channel number :0H - FH (ch.1 - ch.16)
vv=Control Value :00H, 7FH (0, 127)
- Effect1 depth (Reverb send level)
Status Second Third
BnH 5BH vvH
n=MIDI channel number :0H - FH (ch.1 - ch.16)
vv=Reverb send level :00H - 7FH (0 - 127)
* This message is sent when you execute to transmit GS Setup Data.
- Effect3 depth (Chorus send level)
Status Second Third
BnH 5DH vvH
n=MIDI channel number :0H - FH (ch.1 - ch.16)
vv=Chorus send level :00H - 7FH (0 - 127)
* This message is sent when you execute to transmit GS Setup Data.
- NRPN MSB/LSB
Status Second Third
BnH 63H mmH
BnH 62H llH
n=MIDI channel number :0H - FH (ch.1 - ch.16)
mm=MSB of the NRPN
ll=LSB of the NRPN
* This message is sent when you depress an Expression pedal that has been
connected and assigned the TVF Cut-Off frequency function.
NRPN Data entry Description
MSB LSB MSB
=========================================================
01H 20H mmH TVF cutoff frequency
relative change on specified channel
mm: 0EH - 40H - 72H (-50 - 0 - +50)
- RPN MSB/LSB
Status Second Third
BnH 65H mmH
BnH 64H llH
n=MIDI channel number :0H - FH (ch.1 - ch.16)
mm=MSB of the RPN
ll=MSB of the RPN
* This message is sent when you execute to transmit GS/GM Setup Data.
0 = OFF, 127 = ON
45