Cornelius Viper 3 Installation Instructions Manual page 4

Hide thumbs Also See for Viper 3:

Viper 3 Flavor Plumbing Installation Instructions

NOTE: Tubing, hoses, and cabling may be routed from beneath or in back of the Viper FCB unit. It

may be necessary to make a penetration in the counter or wall to accommodate the desired

installation.

NOTE: If the syrup lines will be routed in an area that will see temperatures less than 55°F the lines

must be insulated.

½ Inch Beverage T ubing

3/8 Inch Beverage T ubing

¼ Inch Beverage T ubing

3/8 Inch T ygon T ubing

Water Filter

BIB Syrup

Publication Number: 629096928INS

FCB Unit

BIB Pump

Figure 1. Plumbing diagram Viper 3 Flavor

- 4 -

Connections

¼ Inch Female Flare Nut

Direct Connection to Syrup

Outlet on Syrup Pump

Direct Connection to CO2

Inlet on Syrup Pump

Direct Connection to Syrup

Inlet on Syrup Pump

1/2 to3/8 Inch Fitting reducer

¼ Inch Cross Barb

CO2 Regulator - Primary

3/8 Inch Tee Barb

3/8 Inch Flare Nut and Barb (3/8)

3/8 to 1/4 Inch Fitting Reducer

1/4 Inch Tee barb

BIB Pump

115 Psig

Table of Contents