Extron electronics SW4 User Manual page 33

11.
If you want to remove a device from the Devices section, do the following:
a.
Click on the names of the devices to be deleted, to highlight them.
b. Select
Remove Selected Device(s)
c.
On the Remove Device(s) window, select or deselect any devices on the list as
desired, then click
Remove
To remove all devices, select
12. Click Begin. The following indicators show the progress of the update:
The Transfer Time section shows the amounts of remaining and elapsed time for
•
the update.
The Total Progress section displays a progress bar with
•
In the Devices section, the Progress column displays an incrementing percentage
•
and another progress bar. The Status column displays
Figure 21. Firmware Upload in Progress
13. The upload is complete when the
Progress column shows
in the Status field. Close the Firmware Loader window.
Figure 22. Firmware Upload Complete
from the
.
Remove All Devices
Remaining Time
, and is displayed above the progress bar and
100% Completed
SW HDMI Series • Remote Communication and Control
menu.
Edit
from the menu.
Edit
Uploading... above it.
Uploading .
field shows , the
00.00.00
27