Warning:
The precautions outlined in this chapter should be strictly followed. Failure to follow these
precautions may result in permanent damage to the TPC6000‐A2152‐T:
A.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
A.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
Follow the electrostatic precautions outlined below whenever the TPC6000‐A2152‐T is
opened.
Make sure the power is turned off and the power cord is disconnected whenever the
TPC6000‐A2152‐T is being installed, moved or modified.
Do not apply voltage levels that exceed the specified voltage range. Doing so may
cause fire and/or an electrical shock.
Electric shocks can occur if the TPC6000‐A2152‐T chassis is opened when the
TPC6000‐A2152‐T is running.
Do not drop or insert any objects into the ventilation openings of the
TPC6000‐A2152‐T.
If considerable amounts of dust, water, or fluids enter the TPC6000‐A2152‐T, turn off
the power supply immediately, unplug the power cord, and contact the
TPC6000‐A2152‐T vendor.
DO NOT do the following:
DO NOT drop the TPC6000‐A2152‐T against a hard surface.
DO NOT strike or exert excessive force onto the LCD panel.
DO NOT touch any of the LCD panels with a sharp object.
DO NOT use the TPC6000‐A2152‐T in a site where the ambient temperature exceeds
the rated temperature
A.1.2 Anti‐static Precautions
Warning:
Failure to take ESD precautions during the installation of the TPC6000‐A2152‐T may result in
permanent damage to the TPC6000‐A2152‐T and sever injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components, including
the TPC6000‐A2152‐T. Dry climates are especially susceptible to ESD. It is therefore critical
TPC6000‐A2152 User Manual
82