Driver Installation - American Megatrends TPC6000-A2152 User Manual

 Switch button (PWR)
We provide a ATX power touch switch button (PWR) to power up on rear panel.
 Power connector interface:
TPC6000‐A2152‐T offers a 3‐pins power input interface:
Table 2‐10: Power connector
 PWR, hard drive status indicators
We provide a set of power, hard drive status indicators, you can know the procedure
status by these indicators, green light constantly is for power‐up. Red light flashing on hard
drive indicator is shows that the hard drive is reading/writing data for now.
2.10 Driver installation
Notice:
The content of the CD may vary throughout the life cycle of the product and is subject to
change without prior notice. Visit the NODKA website or contact technical support for the
latest updates.
When you finish the system setup, user should setup the driver of chipset, network card,
audio card, display card.
All drivers' program will be store in an optical disc in accessory box, That will helps user to
install the driver and know the functions.
Installation steps: First step is chipset's driver (INF), then the other driver, it's better that
once you finish a installation, reboot the system, now let's talk about method of Intel EMGD
display card driver installation in Windows 7.
The following drivers can be installed on the system, each driver is in its own directory on
the driver CD:

Chipset driver

Graphics driver

LAN driver
TPC6000‐A2152 User Manual
31
PIN SIGNAL
1 GND
2 12V