2.7.3 USB connection
To connect USB device to the TPC6000‐A2152‐T, please follow the instruction below:
Step 1:
Located the USB connectors. The locations of the USB connectors are shown in
Chapter 2.
Step 2: Align the connectors. Align the USB device connector with one of the connector on
the bottom panel. Please See Figure 2‐15
Figure 2‐15: USB Device connector
Step 3:
Insert the device connector. Once aligned, gently insert the USB device connector
into the onboard connector.
2.7.4 VGA monitor connection
The VGA output can be connected to an external VGA monitor. To connect the VGA monitor
to the TPC6000‐A2152‐T, please follow the instruction below:
Step 1:
Located the female DB‐15 connectors. The locations of the VGA connectors are
shown above.
Step 2: Align the connectors. Align the male DB‐15 connector on VGA screen cable with the
female DB‐15 connector on the external peripheral interface.
Step 3: Insert the VGA connector. Once the connectors are properly aligned with the insert
the male connector from the VGA screen into female connector on the
TPC6000‐A2152‐T, please see the figure 2‐16:
TPC6000‐A2152 User Manual
26