Set Up Ipv6 Connection - TP-Link Touch P5 User Manual

Set Up IPv6 Connection

2.21
If your ISP provides IPv6 connection and has provided some detailed IPv6 parameters, you can configure the router to
permit IPv6 connection.
I want to Connect to IPv6 network with information provided by my ISP.
For example:
PPPoE, Dynamic IP, Static IP, 6to4 tunnel, 6RD, DS-lite and Pass-Through (Bridge).
1. Visit http://tplinkwifi.net/, and log in with the username and password you set for the router.
How can I
do that?
2. Go to
3. Select the Internet connection type provided by ISP. Fill in information as required by different
connection type.
Note:
according to
1)
2)
3)
4)
Chapter 2 Configure your Touch P5 as a Router
my ISP provides information about one of the following Internet connection types:
Advanced > IPv6 to enable IPv6 connection.
If you do not know what your Internet connection type is, contact your ISP or judge
already knownthe
Static IP: Fill in blanks and click Save.
Dynamic IP: Click Advanced
the settings and then click
PPPoE: Fill in the Username and Password. Click
ISP requires. Click Save to save the settings and click
6to4 Tunnel: An IPv4 Internet connection type is a prerequisite for this connection type.
Click Advanced to have more configuration if ISP requires. Click
and then click Connect to finish the configuration.
information provided by your ISP.
to have more configuration if ISP requires. Click
Renew to finish the configuration.
Advanced
Save
to have more configuration if
Connect to finish the configuration.
Save to save the settings
to save
55