Advanced Wireless Settings - TP-Link Touch P5 User Manual

Ac1900 touch screen wi-fi gigabit router

Hide thumbs Also See for Touch P5:

Quick installation manual (2 pages)

User manual (103 pages)

Quick installation manual (57 pages)

Table Of Contents

Table of Contents

WEP: Select this option to enable basic authentication method if any of your client devices can only access the

•

wireless using WEP (Wired Equivalent Privacy).

To change the mode, channel or transmit power:

Select the wireless network 2.4GHz or 5GHz.

Mode:

Select the desired mode.

• 802.11n only: Select only if all of your wireless clients are 802.11n devices.

• 802.11g/n mixed: Select if you are using both 802.11b and 802.11g wireless clients.

• 802.11b/g/n mixed: Select if you are using a mix of 802.11b, 11g, and 11n wireless clients.

Note:

When 802.11n only mode is selected, only 802.11n wireless stations can connect to the modem router. It is

strongly recommended that you select 802.11b/g/n mixed, and all of 802.11b, 802.11g, and 802.11n wireless

stations can connect to the modem router.

• 802.11ac only (5GHz): Select only if all of your wireless clients are 802.11ac devices.

• 802.11 n/ac mixed (5GHz): Select if you are using both 802.11n and 802.11ac wireless clients.

• 802.1111a/n/ac mixed (5GHz): Select if you are using a mix of 802.11ac, 802.11n and 802.11ac wireless clients. It is

strongly recommended that you select 11a/n/ac mixed.

Channel Width:

Select the channel width from the list. The default setting is automatic, which can adjust the channel

width for your clients automatically.

Channel:

Select the channel you want to use from the list. This field determines which operating frequency will be used.

It is not necessary to change the wireless channel unless you notice interference problems with another nearby access

point.

Transmit Power:

Select either High, Middle, or Low to specify the data transmit power. The default and recommended

setting is High.