Dhcp Server - TP-Link Touch P5 User Manual

DHCP Server

2.13
The DHCP Server app can configure the router to act as a DHCP (Dynamic Host Configuration Protocol) server to assign
IP addresses to its clients and view client information from the client list. To use the DHCP server function of the router,
you must configure all computers on the LAN as "Obtain an IP Address automatically".
You can also manually reserve an IP address for a client that is connected to the router. Once reserved, the IP address
will only be assigned to the same client by the DHCP server. If there are some devices in the LAN that require permanent
IP addresses, please configure
1. On the menu screen, tap the
2. Configure the DHCP settings according to your needs.
To set DHCP server of the router:
1. Select DHCP Server.
Chapter 2 Configure your Touch P5 as a Router
Address Reservation on the router for the purpose.
DHCP Server icon to open it.
33