Wps - TP-Link Touch P5 User Manual

WPS

2.6
The WPS app helps you quickly establish a wireless connection between the Wi-Fi Protected Setup (WPS) supported
devices and Touch P5. Wireless devices that support WPS, including Android phones, tablets, and most USB network
cards, can connect to your router through this method. (WPS is not supported by IOS devices.)
Note: The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be
disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the
appropriate encryption before configuring the WPS.
1. On the menu screen, tap the
2. Connect either using either WPS Button method or PIN method
Option 1 Use the WPS Button (Recommended)
Use this option if your client device has a Wi-Fi Protected Setup button.
1. Tap the Start WPS
process.
Chapter 2 Configure your Touch P5 as a Router
WPS icon to open it.
button on the screen of the router, and the WPS button will show as below during the
18