Table of Contents
Advertisement
Configuring Network
Click the Edit button to load the following page. Enter the IP address of the LAN port, and
click OK.
IP Address
Subnet Mask
Mode
Vlan
Note:
•
Changing the IP address of LAN port will automatically redirect the browser to the new
management page. If the redirecting failed, please try to reconnect your PC to the router to
automatically get a new IP address, or configure a proper static IP address manually.
•
Changing the IP address of the LAN port may affect some related functions, like the IP pool of
the DHCP server.
3.2 Configuring the DHCP Server
You can configure an IP address pool for the DHCP server to assign IP addresses. When
clients send requests to the DHCP server, the server will automatically assign IP addresses
and the corresponding parameters to the clients.
Choose the menu Network > LAN > LAN to load the following page. Click the Edit button in
the Network List section.
Enter the IP address of the LAN port.
This IP address is the default gateway of the LAN clients, and the IP addresses of all
the LAN clients should be in the same subnet with this LAN IP address.
Enter the subnet mask of the LAN port.
Specify whether to use a normal VLAN or bridge VLANs. When bridge is selected, you
can configure multiple VLANs for devices to access the LAN network.
Specify the VLAN of the LAN port, only the clients in the specified VLAN can access
and manage the router.
LAN Configuration
User Guide
19
Advertisement
Table of Contents
