Pushing Assist Function - Yamaha PW-SE series Original Instructions Manual

TROUBLESHOOTING
Symptom
An assist mode lamp
lights up in red and
an error description is
indicated in the
function display.
Error displays

Pushing assist function

Symptom
The pushing assist
function turns off.
Check
Check
Is the tire locked for a
few seconds?
Did you pedal while the
pushing assist function
was running?
50
Action
The speed sensor cannot detect a
correct signal.
Turn off the power to the display unit and
then turn it on again.
Select the assist mode and then ride for
a short distance.
Also, make sure the magnet is mounted
correctly on the spokes of the wheels.
Action
Release your finger from the pushing
assist switch for a moment, and after
making sure that the tires turn, push the
switch again.
Take your feet off the pedals and remove
your finger from the pushing assist
switch for a moment.
Then press the switch again.