Stopwatch And Settings - Yamaha PW-SE series Original Instructions Manual

INSTRUMENT AND CONTROL FUNCTIONS
Main riding display
[S---]

2 Stopwatch and settings

The display enables the following.
• STOPWATCH
Stopwatch function
• TIME ADJ (TIME ADJUST)
Clock setting
• DIST UNIT (DISTANCE UNIT)
km/mile setting
• DSPL ITEM (DISPLAY ITEM)
Sets the items to be displayed in the function display
during normal riding.
• RESET
Resets the values of the trip meter, average bicycle
speed, and maximum bicycle speed.
[L]
• BLE (Bluetooth low energy technology)
[S]
Switches the profiles and turns off the wireless func-
tion.
[L][M]
• USB
[S]
Switches the USB receptacle between a power supply
port and a wired communication port.
[L][M]
• LED
[S] Changes between lighting the assist mode lamp and
keeping the assist mode lamp unlit.
[L][M]
1. Press the function select switch for 2 seconds or long-
[S]
er.
2. Select an item by using the assist mode switches (up &
[L][M]
down).
Press the function select switch at the displayed item
[S]
that you want to select, and the selected item will then
be displayed.
[L][M]
Selecting "EXIT" returns to the main riding display.
[S]
[L][M]
For all setting procedures, be sure to stop the bicycle
[S]
and perform the required settings in a safe location.
Otherwise, lack of attention to surrounding traffic
could cause an accident.
[L][M]
[S]
[L][M]
[S---] ���� Press the function select switch for 2 seconds or
[S]
[S] ������� Press the function select switch
[M]
[▲] ������ Press the assist mode switch (up)
[▼] ������ Press the assist mode switch (down)
WARNING
longer
21