Reading The Charging Status - Yamaha PW-SE series Original Instructions Manual

BATTERY PACK AND CHARGING PROCEDURE

Reading the charging status

Battery capacity indicator lamps
Battery
charger lamp
(Rear carrier type)
Lit power lamps indicate the
amount of charging completed. A
flashing power lamp indicates
current progress.
On
(Example: Battery is approximately
50–75 % charged.)
Four lamps flash simultaneously.
Off
(Down tube type)
Charging
Charging
completed
Off
Battery is in
standby mode.
* The battery
Battery is in
fault mode.
39
Current
status
During charging, the
battery capacity indicator
lamps light up one by one.
When charging is
complete, the charging
lamp on the battery
charger and the battery
capacity indicator lamp on
the battery pack go off.
Charging will
automatically restart when
a temperature is reached
that allows charging. (See
"Appropriate charging
internal environments".)
temperature
is too high When possible, always
or too low. perform charging at the
optimal temperature of
15–25 °C.
There is a fault in the
charging system. See
"TROUBLESHOOTING".
Details