Advertisement
Table of Contents
- 1 Introduction
- 2 Three Types of “Assist Mode” Are Available
- 3 Power Assist Chart
- 4 Instrument and Control Functions
- 5 Display Unit (LED Type)
- 6 Power “On/Off”
- 7 Isplaying and Switching the Assist Mode
- 8 Displaying and Switching the Battery Capacity Indicator, Range Meter, Speedometer
- 9 Headlight “On/Off”
- 10 Display of Faults Detected by Diagnosis Mode
- 11 Residual Battery Capacity Indicator Display and Estimate of Residual Battery Capacity for Display Unit (LED Type)
- 12 Troubleshooting
- Download this manual
Advertisement
Table of Contents
Related Manuals for Yamaha PW series
Summary of Contents for Yamaha PW series
- Page 1 q READ THIS MANUAL CAREFULLY! It contains important safety information. Display Unit (LED type) ORIGINAL INSTRUCTIONS...
- Page 2 DESCRIPTION 1. Display unit (LED type)
- Page 3 E-BIKE SYSTEMS The e-Bike Systems are designed to give you the optimal amount of power assist. It assists you within a standard range based on factors such as your pedaling strength, bicycle speed, and current gear. The e-Bike Systems do not operate in the following situations: •...
- Page 4 E-BIKE SYSTEMS Power assist chart High High-Performance mode Standard mode Power-saving Eco mode Starting off Level road Inclined road Steep incline High-Performance Standard Eco mode mode mode A mode that can be The recommended A mode for saving counted on to mode, balancing assist power to provide powerful...
- Page 5 INSTRUMENT AND CONTROL FUNCTIONS Display unit (LED type) Function display Residual battery (Battery capacity indicator/ range meter/speedometer) capacity lamp Remaining assist Assist mode distance lamp switch (up) Function select switch Bicycle speed lamp Assist mode switch (down) Power switch Light lamp Assist mode lamp Light switch...
- Page 6 INSTRUMENT AND CONTROL FUNCTIONS Display unit (LED type) The display unit (LED type) offers the following operations and information displays. 2 Power “On/Off” Each time you press the power switch, the power switches between “On” and “Off”. When the power turns on, all the lamps on the display unit light up for approximately 2 sec- onds and then turn off again.
- Page 7 INSTRUMENT AND CONTROL FUNCTIONS 2 Displaying and switching the battery capaci- ty indicator, range meter, speedometer You can display either the battery capacity indicator, Function display Residual battery (Battery capacity indicator/ range meter or speedometer. capacity lamp range meter/speedometer) The battery capacity indicator displays an estimate of how much capacity is left in the battery pack, the range meter displays an estimate of the remaining assist distance (kilo- meters) on the residual battery capacity (In assist off...
- Page 8 INSTRUMENT AND CONTROL FUNCTIONS 2 Display of faults detected by diagnosis mode Residual battery The e-Bike Systems are equipped with a diagnosis mode. Error display capacity lamp When you turn on the display unit’s power, if there is a malfunction or fault in the e-Bike Systems, the systems notify you of the fault by flashing the assist mode lamp, residual battery capacity lamp, remaining assist distance lamp, and bicycle speed lamp alternately, and displaying...
- Page 9 CHECKING THE RESIDUAL BATTERY CAPACITY You can check the estimate of how much capacity is left in the battery and to what extent it is charged. The check can be performed using either the display unit’s residual battery capacity indi- cator or the battery’s residual battery capacity indicator lamps.
-
Page 10: Troubleshooting
TROUBLESHOOTING E-Bike Systems Symptom Check Action The assist mode lamps, residual battery capacity lamp, remaining assist distance lamp are flashing in an alternating pattern (at intervals of roughly 0.2 seconds). There could be a problem inside the Or, the assist mode Drive Unit is malfunctioning.