Charging The Battery Pack Mounted On The Bicycle - Yamaha PW-SE series Original Instructions Manual

BATTERY PACK AND CHARGING PROCEDURE
WARNING
If a charging fault occurs during charging, remove the
power plug of the battery charger from the socket and
wait for the battery pack/battery charger to cool.
[CHARGING THE BATTERY PACK MOUNTED ON THE
BICYCLE] (Rear carrier type)
1. Connect the power plug of the battery charger to a
household power outlet.
2. Remove the lid of the battery holder cover and the cap
of charging inlet from the charging connector on the
battery pack, and connect it to the charging plug on the
battery charger.
[CHARGING THE BATTERY PACK MOUNTED ON THE
BICYCLE] (Down tube type)
1. Connect the power plug of the battery charger to a
household power outlet.
2. Remove the cap of charging inlet from the charging
connector on the battery pack, and connect it to the
charging plug on the battery charger.
NOTICE
• Do not connect the charging plug of the battery
charger with the charging connector of the battery
in a wet state.
• Be sure to connect the charging plug only after the
charging connector on the battery pack is com-
pletely dry.
Otherwise the battery charger and battery may mal-
function.
• Do not apply excessive force to the charging plug
or pull on the cord with the charging plug connect-
ed to the battery.
Otherwise, the plug or connector may be damaged.
35