Battery Pack And Charging Procedure - Yamaha PW-SE series Original Instructions Manual

BATTERY PACK AND CHARGING PROCEDURE

Battery capacity Battery charger lamp
indicator lamp
Battery
Battery capacity
capacity indicator button
indicator
Charging plug
Charging connector
Battery
capacity
indicator
Charging connector
The battery pack equipped for the Yamaha e-Bike Sys-
tems is a lithium-ion battery. The lithium-ion battery is
lightweight and offers superior capacity. However, it does
have the following characteristics.
• Its performance decreases in extremely hot or cold en-
vironments.
• It naturally loses its charge.
Charger
The battery pack for the Yamaha e-Bike Systems also has
display
an embedded computer which notifies you of estimated
residual battery capacity and suspected faults via the bat-
tery capacity indicator lamp.
By pressing the battery capacity indicator button, you can
display the residual battery capacity for approximately 5
seconds.
See "CHECKING THE RESIDUAL BATTERY CAPACITY"
for the estimate of the residual battery capacity. See
"TROUBLESHOOTING" for information on fault flashing.
Power plug
Battery capacity
indicator lamp
Battery capacity
indicator button
33