Home >
Machine Settings
Using Web Based Management
Set Up Your Machine's Address Book Using Web Based Management
•
We recommend using the HTTPS security protocol when configuring settings using Web Based
Management.
•
When you use HTTPS for Web Based Management configuration, your browser will display a warning
dialog box.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
•
If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
-
For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
-
For example:
http://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
•
For Mac, access Web Based Management by clicking the machine's icon on the Status Monitor
screen.
3. No password is required by default. Type a password if you have set one, and then click
4. Click the Address Book tab.
5. Add or update the Address Book information as needed.
6. Click Submit.
Related Information
•
Change Machine Settings Using Web Based Management
•
Remote Setup (Windows
•
Remote Setup (Mac)
>
Change Machine Settings from Your Computer
> Set Up Your Machine's Address Book Using Web Based Management
®
)
>
Change Machine Settings
.
623