Brother HL-L2395DW Online User's Manual page 320

If a list of SSIDs is displayed, press a or b to display the SSID to which you want to connect, and then press
the SSID.
5. Press [OK].
6. Do one of the following:
• If you are using an authentication and encryption method that requires a Network Key, enter the Network
Key you wrote down in the first step.
When you have entered all the characters, press [OK].
• If your authentication method is Open System and your encryption mode is None, go to the next step.
• If your WLAN access point/router supports WPS, [The selected access point/router
supports WPS. Use WPS?] appears. To connect your machine using the automatic wireless mode,
press [Yes]. (If you choose [No], enter the Network Key you wrote down in the first step.) When
[Start WPS on your wireless access point/router, then press [Next].] appears,
press the WPS button on your WLAN access point/router, and then press [Next].
7. The machine attempts to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install Full Driver & Software Package necessary for
operating your device, insert the Brother installation disc into your computer or go to your model's Downloads
page on the Brother Solutions Center at support.brother.com.
Related Information
• Additional Methods of Configuring Your Brother Machine for a Wireless Network
• How to Enter Text on Your Brother Machine
• Wireless LAN Report Error Codes
313