Brother HL-L2395DW Online User's Manual page 589

Home > Machine Settings
Tables > Settings Tables (2 Line LCD MFC models)
Settings Tables (2 Line LCD MFC models)
Related Models: MFC-L2710DW/MFC-L2713DW/MFC-L2715DW/MFC-L2716DW
[General Setup]
Level 1 Level 2
Default Mode -
Mode Timer -
Tray Setting Paper Type
Paper Size
Check Size
Volume Ring
Beep
Speaker
Ecology Eco Mode
Toner Save
Sleep Time
Quiet Mode
Auto Power
Off
LCD Contrast -
Security TX Lock
Setting Lock
Replace Toner -
[Fax]
Level 1
Setup Receive
> Change Machine Settings from the Control Panel
Level 3 Descriptions
- Select the default mode.
- Set the idle time before the machine returns to the default mode.
- Set the type of paper in the paper tray.
- Set the size of paper in the paper tray.
- Select whether to display a message telling you to check that the
size and type of the paper in the machine and the machine's Paper
Size and Paper Type settings match.
- Adjust the ring volume.
- Adjust the beeper volume.
- Adjust the speaker volume.
- Turn the following machine settings on at the same time.
•
•
- Increase the page yield of the toner cartridge.
- Set the number of minutes before the machine enters Sleep mode.
- Decrease printing noise.
- Set the number of hours that the machine will remain in Deep Sleep
mode before going into Power Off mode.
- Adjust the LCD contrast.
- Prohibit most operations except receiving faxes.
- Restrict unauthorised users from changing the machine's settings.
- Set the machine to continue printing after the LCD displays Replace
Toner.
Level 2 Level 3 Descriptions
Receive Mode -
Ring Delay -
F/T Ring Time -
Fax Detect -
Remote Codes -
Auto Reduction -
2-sided Print:Long Edge (Available only for certain models)
Sleep Time:0Min
Select the receive mode that best suits your needs.
Set the number of rings before the machine answers in
Fax or Fax/Tel mode.
Set the length of the pseudo/double-ring time in Fax/Tel
mode.
Receive fax messages automatically when you answer a
call and hear fax tones.
Answer calls at an extension or external telephone and
use codes to turn the Remote Codes on or off. You can
personalise the codes.
Reduce the size of incoming faxes.
> Settings and Features
582