Brother HL-L2395DW Online User's Manual page 597

Level 1 Level 2
2-sided Single
Image
Auto Continue -
Tray Command -
Reset Printer -
For the Other models
Level 1 Descriptions
Test Print Print a test page.
2-sided Turn 2-sided printing off or on and select flip on long edge or short edge.
Auto Continue Select this setting if you want the machine to clear paper size errors, and to use the paper in the
tray.
Reset Printer Restore the printer settings to the factory settings.
[Network]
For wired and wireless network models
Level 1 Level 2
Wired LAN TCP/IP
Ethernet
Wired Status
MAC Address
Set to Default -
Wired Enable
Level 3 Descriptions
- For a print job where the last page is a 1-sided image, select the
1-sided Feed option to reduce printing time.
- Select this setting if you want the machine to clear paper size
errors, and to use the paper in the tray.
- Select this setting if a tray mismatch appears when you use the
HP drivers.
- Restore the printer settings to the factory settings.
Level 3 Level 4
Boot -
Method
IP Address -
Subnet -
Mask
Gateway -
Node Name -
WINS -
Config
WINS Primary
Server
Secondary Specify the IP address of the secondary WINS
DNS Server Primary
Secondary Specify the IP address of the secondary DNS
APIPA -
IPv6 -
- -
- -
- -
-
- -
Descriptions
Select the Boot method that best suits your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
(Up to 32 characters)
Select the WINS configuration mode.
Specify the IP address of the primary WINS
server.
server.
Specify the IP address of the primary DNS server.
server.
Set the machine to allocate the IP address from
the link-local address range automatically.
Turn the IPv6 protocol on or off. For more detailed
information, go to your model's FAQs &
Troubleshooting page on the Brother Solutions
Center at support.brother.com.
Select the Ethernet link mode.
View the current wired status.
View the machine's MAC address.
Restore the wired network settings to the factory
settings.
Turn the Wired LAN interface on or off manually.
590