Brother HL-L2395DW Online User's Manual page 559

Home > Machine Settings
Mode Timer
Set the Mode Timer
Related Models: MFC-L2710DW/MFC-L2713DW/MFC-L2715DW/MFC-L2716DW
The machine returns to the default mode after use of the machine in a mode other than the default mode. The
Mode Timer setting defines how much time the machine takes after the last operation to return to the default
mode. If you choose [Off], the machine will stay in the mode you used last.
• For MFC models, the machine has three mode buttons on the control panel: FAX, SCAN and COPY.
• For DCP models, the machine has Scan and Copy. Default is Copy mode and mode timer setting is one
minute.
1. Press Menu.
2. Press a or b to display the [General Setup] option, and then press OK.
3. Press a or b to display the [Mode Timer] option, and then press OK.
4. Press a or b to display the [5Mins], [2Mins], [1Min], [30Secs], [0Sec], or [Off] option, and then
press OK.
5. Press Stop/Exit.
Related Information
• General Settings
> Change Machine Settings from the Control Panel > General Settings > Set the
552