Brother HL-L2395DW Online User's Manual page 598

Hide thumbs Also See for HL-L2395DW:
Table of Contents

Advertisement

Level 1
Level 2
WLAN
TCP/IP
Setup Wizard
WLAN Assistant -
WPS
WPS w/PIN Code -
WLAN Status
MAC Address
Set to Default -
WLAN Enable
Wi-Fi
Push Button
Direct
PIN Code
Manual
Group Owner
Level 3
Level 4
Boot
-
Method
IP Address -
Subnet
-
Mask
Gateway
-
Node Name
-
WINS
-
Config
WINS
Primary
Server
Secondary Specify the IP address of the secondary WINS
DNS Server Primary
Secondary Specify the IP address of the secondary DNS
APIPA
-
IPv6
-
-
-
-
-
-
-
Status
-
Signal
-
Channel
-
Speed
-
SSID
-
Comm. Mode -
-
-
-
-
-
-
-
-
-
-
-
-
-
Descriptions
Select the Boot method that best suits your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
(Up to 32 characters)
Select the WINS configuration mode.
Specify the IP address of the primary WINS
server.
server.
Specify the IP address of the primary DNS server.
server.
Set the machine to allocate the IP address from
the link-local address range automatically.
Turn the IPv6 protocol on or off. For more detailed
information, go to your model's FAQs &
Troubleshooting page on the Brother Solutions
Center at support.brother.com.
Configure your wireless network settings
manually.
Configure your wireless network settings using the
Brother installation disc.
Configure your wireless network settings using the
one-button push method.
Configure your wireless network settings using
WPS with a PIN.
View the current wireless network status.
View the current wireless network signal strength.
View the current wireless network channel.
View the current wireless network speed.
View the current SSID.
View the current Communication mode.
View the machine's MAC address.
Restore the wireless network settings to the
factory settings.
Turn the WLAN on or off manually.
Configure your Wi-Fi Direct network settings using
the one-button push method.
Configure your Wi-Fi Direct network settings using
WPS with a PIN code.
Configure your Wi-Fi Direct network settings
manually.
Set your machine as the Group Owner.
591

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents