Brother HL-L2395DW Online User's Manual page 574

Home > Machine Settings
Continue Mode
Set the Continue Mode
The Continue Mode forces the machine to continue printing after the control panel displays Replace Toner.
The machine will continue printing until the LCD displays Toner Ended.
The factory setting is Stop.
• When the control panel indicates an error, you cannot change the mode.
• If you continue printing in the Continue Mode, we cannot guarantee the print quality.
• While using Continue Mode the print may appear faint.
• After replacing the toner cartridge with a new one, the Continue Mode will go back to the default
setting (Stop).
>> DCP-L2531DW/DCP-L2535DW/DCP-L2550DW/MFC-L2710DW/MFC-L2713DW/MFC-L2715DW/
MFC-L2716DW
>> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2751DW/MFC-L2770DW/MFC-L2771DW
DCP-L2531DW/DCP-L2535DW/DCP-L2550DW/MFC-L2710DW/MFC-L2713DW/
MFC-L2715DW/MFC-L2716DW
1. Press Menu.
2. Press a or b to display the [General Setup] option, and then press OK.
3. Press a or b to display the [Replace Toner] option, and then press OK.
4. Press a or b to display the [Continue] or [Stop] option, and then press OK.
5. Press Stop/Exit.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2751DW/MFC-L2770DW/
MFC-L2771DW
1. Press [Settings] > [All Settings] > [General Setup] > [Replace Toner].
2. Press [Continue] or [Stop].
3. Press .
Related Information
• General Settings
> Change Machine Settings from the Control Panel > General Settings > Set the
567