Brother HL-L2395DW Online User's Manual page 471

Error Message
Size Error 2-sided
Size mismatch
Toner Ended
Toner Low
Touchscreen Initialisation
Failed
Related Information
• Troubleshooting
• Replace Supplies
• Load and Print Using the Multi‑purpose Tray (MP Tray)
• Replace the Drum Unit
• Clean the Corona Wire
• Print a Fax Stored in the Machine's Memory
Cause
The paper size specified in the printer
driver and the machine's paper size
setting are not available for automatic
2-sided printing.
The paper in the tray is not the
correct size and is not available for
automatic 2-sided printing.
The paper in the tray is not the
correct size.
The toner cartridge is at the end of its
life.
If the LCD displays this message, you
can still print. The toner cartridge is
near the end of its life.
The touchscreen was pressed before
the power on initialization was
completed.
Debris may be stuck between the
lower part of the touchscreen and its
frame.
Action
machine idle for 15 minutes with the
power on.
Press . Choose a paper size
supported by 2-sided printing.
Paper size available for automatic 2-
sided printing is A4.
Load the correct size of paper in the
tray and set the tray for that paper
size.
Paper size available for automatic 2-
sided printing is A4.
Load the correct size of paper in the
tray and set the size of paper to the
tray.
Replace the toner cartridge with a
new one.
Order a new toner cartridge now so a
replacement toner cartridge is
available when the LCD displays
Replace Toner.
Make sure nothing is touching or
resting on the touchscreen.
Insert a piece of stiff paper between
the lower part of the touchscreen and
its frame and slide it back and forth to
push out the debris.
464