Brother HL-L2395DW Online User's Manual page 469

Error Message
Drum End Soon
FaxAbility On
(For New Zealand)
Jam 2-sided
Jam Inside
Jam Rear
Jam Tray
Limit Exceeded
Manual Feed
No Caller ID
No Paper
No Response/Busy
Cause
The drum unit or the toner cartridge
and drum unit assembly is not
installed correctly.
The drum unit is near the end of its
life.
The machine is set to Faxability
mode. You can not change the
Receive Mode from Manual to
another mode.
The paper is jammed in the 2-sided
paper tray.
The paper is jammed inside the
machine.
The paper is jammed in the back of
the machine.
The paper is jammed in the indicated
paper tray.
The print limit set in Secure Function
Lock 3.0 was reached.
Manual was selected as the paper
source in the printer driver, but there
is no paper in the manual feed slot.
There is no incoming call history. You
did not receive calls or you have not
subscribed to the Caller ID service
from your telephone company.
The machine is out of paper, or paper
is not loaded correctly in the paper
tray.
The number you dialed does not
answer or is busy.
Action
Put the toner cartridge in the drum
unit. Then reinstall the toner cartridge
and drum unit assembly in the
machine.
Order a new drum unit before you get
the Replace Drum message.
Set FaxAbility to Off.
Pull the paper tray and the 2-sided
tray out completely, open the back
cover and then remove all jammed
paper. Close the back cover, and put
the paper tray and the 2-sided tray
firmly back in the machine.
Open the front cover and remove the
toner cartridge and drum unit
assembly. Pull out the jammed paper.
Close the front cover.
Open the fuser cover and remove all
jammed paper. Close the fuser cover.
If the error message remains, press
Retry.
Pull the paper tray out completely and
remove all jammed paper. Put the
paper tray firmly back in the machine.
Call your administrator to check your
Secure Function Lock Settings.
Place paper in the manual feed slot.
If you want to use the Caller ID
feature, call your telephone company.
• Refill paper in the paper tray.
Make sure the paper guides are
set to the correct size.
• If paper is in the tray, remove it
and load it again. Make sure the
paper guides are set to the correct
size.
• Do not overfill the paper tray.
Verify the number and try again.
462