Brother HL-L2395DW Online User's Manual page 590

Level 1
Setup Receive
Setup Send
Anti-Junk Fax
(Available only for some
countries.)
Report Setting
Memory Receive
Dial Restrict.
Remaining Jobs
Miscellaneous
Level 2 Level 3 Descriptions
Fax Rx Stamp -
2-sided -
Fax Resolution -
Contrast -
Glass ScanSize -
Real Time TX -
Coverpage Note
Overseas Mode -
Auto Redial -
Destination -
Register -
Delete -
Print Report -
XMIT Verify -
Journal Period -
Forward/Store -
PC Fax Receive -
Remote Access -
Print Document -
Dial Pad -
One Touch Dial -
Speed Dial -
- -
Distinctive -
(Available only for
some countries.)
Faxability -
(For New Zealand.)
Print the received time and date on the top of received
faxes.
Print received faxes on both sides of the paper.
Change the lightness or darkness of faxes you send.
Set the default resolution for outgoing faxes.
Adjust the scan area of the scanner glass to the size of
the document.
Send a fax without using the memory.
Set up your own comments for the fax cover page.
If you are having difficulty sending faxes overseas, set
this to On.
Set the machine to redial the last fax number after five
minutes, if the fax did not go through because the line
was busy.
Set the machine to display the destination information on
the LCD during fax dialling.
Register specific fax numbers to the blocked list to avoid
receiving faxes from the numbers.
Delete the number from the blocked list.
You can print a list of registered fax numbers in the
blocked list.
Select the initial setup for the Transmission Verification
Report.
Set the interval for automatic printing of the Fax Journal.
If you select an option other than Off and Every 50 Faxes,
you can set the time for the option.
If you select Every 7 Days, you can set the day of the
week.
Set the machine to forward fax messages or to store
incoming faxes in the memory (so you can retrieve them
while you are away from your machine).
Set the machine to send faxes to your PC.
Set your own code for Remote Retrieval.
Print received faxes stored in the machine's memory.
Set the machine to restrict dialling when using the dial
pad.
Set the machine to restrict the dialling of One Touch
numbers.
Set the machine to restrict the dialling of Speed Dial
numbers.
Check which scheduled jobs are in the machine's memory
and cancel selected jobs.
Turn on the telephone company's Distinctive Ring
subscriber service to register your new ring pattern on the
machine.
If you have FaxAbility from Telecom, you can use this
function to store the ringing pattern of your fax number.
And if you set in to ON, you should use the registered
number only.
583