Replacing The Touchpad; Procedure; Post-Requisites - Dell Inspiron 15 5000 Service Manual

Replacing the touchpad

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Slide the touchpad into the slot on the palm rest and keyboard assembly.
2 Align the screw holes on the touchpad with the screw holes on the palm rest and
keyboard assembly.
3 Replace the four screws (M2x2) that secure the touchpad to the palm rest and
keyboard assembly.
4 Adhere the tape that secures the touchpad to the palm rest and keyboard
assembly.
5 Adhere the touchpad cable to the touchpad.
6 Slide the end of the touchpad cable into the connector on the system board and
close the latch to secure the cable.

Post-requisites

1 Replace the status-light
2 Replace the battery.
3 Replace the base
48
computer. After working inside your computer, follow
After working inside your
board.
cover.
computer. For more safety best
www.dell.com/
Before