Replacing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
CAUTION: Place the computer on a soft and clean surface to avoid
scratching the display.
1
With the display facing down, align the screw holes on the display hinges with
the screw holes on the palm rest and keyboard assembly.
2
Replace the two screws (M2.5x7) that secure the display assembly to the palm
rest and keyboard assembly.
3
Turn the computer over and close the display.
Post-requisites
1
Replace the
system
2
Replace the
heat
3
Replace the
memory
4
Replace the
wireless
5
Replace the battery.
6
Replace the
base
78
computer. After working inside your computer, follow
After working inside your
board.
sink.
modules.
card.
cover.
computer. For more safety best
www.dell.com/
Before